EWG 2 Small wind power plant trainer

EWG 2 Small wind power plant trainer

Small wind power plants up to approx. 5 kW power are being deployed today for decentralised power supplies. These plants generate DC voltage. The energy can be stored in accumulator batteries using charge controllers. Inverters are used to generate AC voltage for operating consumers requiring the standard electricity supply voltage. The effects of wind power and the mechanical design of wind power stations can be emulated down to the last detail using the servo machine test stand and the software WindSim. The corresponding Interactive Lab Assistant Multimedia course imparts knowledge, provides interactive experiment setup support and allows for PC-assisted evaluation of the measurement data. 

Training content:

  • Understand the design and operation of modern small wind power stations
  • Explore the physical fundamentals “from wind to wave“
  • Become familiar with different wind power station concepts
  • Design and initial operation of a small wind power generator
  • Operation with fluctuation wind force in off-line operation
  • Energy storage, optimisation of the system
  • Design of an off-grid system for the generation of AC voltage
  • Explore hybrid systems for off-grid power supply using wind power and photovoltaic systems (wind/solar trainer) 
Basic equipment set, consisting of:
1
Charge controller for small wind generator 12 V
Charge controller for small wind generator 12 V CO3208-3E
1
Synchronous generator 12V for small wind power plant with permanent magnets
Synchronous generator 12V for small wind power plant with permanent magnets SE2683-1M
1
Lamp board 12V
Lamp board 12V CO3208-1K
1
Load unit 1kOhm, 500W
Load unit 1kOhm, 500W CO3208-1J
1
Off-grid inverter 230V, 275VA
Off-grid inverter 230V, 275VA CO3208-1F
1
Lamp board 230V
Lamp board 230V CO3208-1L
Additionally required, dynamic servo machine test stand:
1
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo
Dynamic servo machine test system for 0.3kW machines incl. software ActiveServo CO3636-6X
1
Rubber coupling sleeve for 300W machines
Rubber coupling sleeve for 300W machines SE2662-2A
1
Coupling guard with LED lighting for 300W machines
Coupling guard with LED lighting for 300W machines SE2662-7C
Media:
1
Interactive Lab Assistant: Small wind power plants
Interactive Lab Assistant: Small wind power plants SO2800-3Q
Measuring instruments:
1
Power-Multimeter
Power-Multimeter CO5127-2A
Accessories:
25
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R
1
Set of safety measurement cables, 4mm, 31 pcs
Set of safety measurement cables, 4mm, 31 pcs SO5148-1L
1
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm)
Mobile aluminum experiment stand, 3 levels, power strip with 6 sockets,(1250 x 1970 x 700 mm) ST7200-4C
Additionally recommended:
1
Monitor holder for flat screen monitor of weight up to 15kg/33lbs
Monitor holder for flat screen monitor of weight up to 15kg/33lbs ST8010-4T
1
Keyboard adapter for flat screen monitor holders
Keyboard adapter for flat screen monitor holders ST8010-4G
1
Display for Small Wind Turbine equipment
Display for Small Wind Turbine equipment ST8000-4E
1
Protection cover for three-level experiment trolleys
Protection cover for three-level experiment trolleys ST8010-9Y

Small wind power plants for outdoors and...   more

1
Small-scale wind turbine 370W, with demonstration mast
Small-scale wind turbine 370W, with demonstration mast CO3208-3F
1
Mast set for small-scale wind turbine
Mast set for small-scale wind turbine CO3208-3G