Course - Automotive Technology 10: Networks in the Vehicle - CAN
Article no.: SO4204-7K

UniTr@in-I multimedia course on the subject "CAN-Bus in the Motor Vehicle" with two experiment cards and a CD-Rom, packed in a robust and stackable hard shell case with polyurethene profile foam insert. Each experiment card contains a microcontroller and BUS-driver and together comprise a complete motor vehicle with actuators, sensors and instrument panel. The CD contains the experimenting platform LabSoft, including virtual instruments and a multimedia course with the following training objectives and contents:

• Two microcontroller systems with communication via the CAN-bus
• Coupling of motor vehicle halves and intercommunication iva  4 x 2 mm cables
• Cascading via CAN-IN and CAN-OUT on Sub-D9 connectors
• CAN node I with blinkers, lights, key ersatz, fuel tank indicator, temperature sensors, and more
• CAN node II with rear light, fuel tank simulation, electric window and central locking functions, and more
• Switch over between High Speed CAN, Low Speed CAN
• CAN oscilloscope
• CAN analyzer
• Editing and transmission functions of CAN messages via PC
• Physical bus signals
• Bus signal level
• Bus topology
• Transfer rates
• Addressing / Arbitration
• Message format
• Terminal resistor can be disabled
• Fault simulation (8 different faults)

Handlungskompetenz mittels geführter Experimente

Fahrzeugteil I mit Sensoren, Aktoren und Erweiterungsanschlüssen

Fahrzeugteil II mit weiteren Sensoren und Aktoren