EPE 10 Line commutated converter circuits

Training objectives:

Fundamentals of the diode, thyristor, triac
Rectification
Control principles: phase-control, full-wave control, burst firing control, pulse pattern control, rectifier operation, inverter operation
Circuits: M1, M2, M3, B2, B6, M1C, M2C, M3C, B2C, B6C, B2HA, B2HK, B2HZ, B6C, B6HA, B6HK, W1C, W3C
Resistive, capacitive and inductive loads
Control characteristics and operating graphs
Suppressor circuit
Computer-assisted data acquisition
Frequency analysis and examination of harmonics

1	Digital universal control unit (microcontroller)	SO3636-1A
1	Static converter valve, 8 thyristors, 6diodes, 1 triac	SO3636-1F
1	Set of overlay masks, line commutated static current converters (9 pcs)	SO3636-1G
1	RLC load with temperature line and 3 indicating lamps	SO3636-2A
1	Three-phase isolating transformer 300VAincl. DC power supply (max. 220V/3A DC)	SO3636-2G
1	Four channel differential amplifier	SO3636-2V
1	Connection cable 0.5m (measuring amplifier - control unit)	LM6120

1	Software power electr. f. the digital control unit SO3636-1A (D,GB,F,E,NL)		SO6001-1A
1	Software Fourier-Analysis and -synthesis with dynamic data exchange (D,GB,F,E)		SO6001-1H

SH5002-3A

SO3538-8A

SO5127-1Z

1	Serial interface cable 9/9 pole	LM9040
2	Set of safety measurement cables 4mm (23pcs)	SO5148-1J
20	Safety connection plug 19/4mm, white	SO5126-9X
10	Safety connection plug 19/4mm, white, with tapping	SO5126-9Z
1	Panel mounting frame for 1200mm table, T-shaped base, 2 levels	ST8003-1C